QuantaMesh-T1048-LYB
1G Management Switch for Data Center and Cloud
- 48 x 10/100/1000BASE-T and 6 x 1/10G SFP+
- Flexibility of supporting standard and premium Intel ATOM CPUs
- Enlarged memory and storage space for automation management tasks
- Redundant PSUs and FANs
- Loaded with ONIE and capable of supporting multiple NOS, Commercial 3rd Party NOS, Open Source, SONiC
Enterprisie SONiC Distribution by QCTEnterprise SONiC Distribution by QCT is a hardened, open distribution of SONiC, enhanced with enterprise-grade features simplified datacenter leaf and spine deployments and AI/ML infrastructure management. It offers reliable, salable, and flexible network solutions tailored to meet modern enterprise demands. Enterprise-ready features includes layer 2 and layer 3 protocols, QoS capabilities, and management protocols. QCT Enterprise SONiC enables organizations to operate with agility and confidence, combining open networking innovation with simplified network management and operational efficiency. The Lite edition is tested and validated for QuantaMesh T1048-LYB, the 1GbE management switch, ensuring compatibility and stability in enterprise deployments. |
QuantaMesh Ethernet Switches with QCT Enterprise SONiC (Lite) provide
|
 |
1G Management Switch for Data Center and CloudQuantaMesh T1048-LYB is a high-performance and power efficient L2/3 switch designed in a 1RU form factor. QuantaMesh T1048-LYB is purpose built as the rack management switch for data center networking, enterprise access networking and campus access networking environments. With 48 ports of 10/100/1000 and 6 integrated 10GbE SFP+ ports the switch delivers non-blocking forwarding capabilities along with rich L2 and L3 features. QuantaMesh T1048-LYB preloaded with ONIE, offering the flexibility to support a variety of network operating systems, including commercial 3rd party NOS, open-source platforms, and SONiC. T1048-LYB supports both standard and premium Interl ATOM processors, allowing operators to balance cost efficiency and system performance as needed. The hardware architecture includes enhanced memory and storage capacity to support sophisticated automation tasks and management features. For enterprise-grade reliability, the switch is equipped with redundant power and cooling systems, featuring 1+1 hot swappable power supply units and 2+1 hot-swappable fan modules to ensure high availability and continuous operation. |
| physische Ports | |
|---|---|
| Port-Konfiguration |
8 10/100/1000 BASE-T and 6 1/10GbE SFP+ ports
|
| Management Port |
1 Out-of-band management port (RJ-45, 10/100/1000Base-T)
|
| Console Port |
1 (RJ-45)
|
| USB |
1 USB 2.0 Type A
|
| Leistung | |
|---|---|
| Schaltleistung |
216Gbps
|
| Latenz |
Ultra-low latency
|
| CPU Board 1 | |
|---|---|
| MAC |
Broadcom TD3-X2 BCM56277
|
| CPU |
Standard: Intel® Atom® C3338R 1.8Hz, 2-Cores
Premimum: Intel® Atom® C3558R 2.4GHz, 4-Cores
|
| Arbeitsspeicher |
8GB DDR4 with ECC
|
| Massenspeicher |
32GB
|
| Giga PHY |
Broadcom BCM54182*3
|
| Switch PHY |
Marvell 88E6320
|
| Layer 2 Funktionen | |
|---|---|
| Spanning-Tree | |
| VLAN |
IEEE 802.1Q Tagged Base
Port-Based |
| Storm Control |
Broadcast
Unknown Multicast DLF (Unknown Unicast) |
| IGMP Snooping |
v1/v2/v3
v1/v2 Querier Immediate Leave |
| Link Aggregation |
Dynamic Load Balancing (DLB)
802.3ad with LACP Static Trunk Unicast/Multicast Traffic Balance over Trunking Port LACP Fallback |
| QoS-Funktionen | |
|---|---|
| COS |
802.1p, IP TOS Precedence, DSCP
|
| DiffServ | |
| DSCP to Traffic Class Mapping | |
| Sicherheits-Funktionen | |
|---|---|
| Zugriffskontrollliste |
L2/L3/L4
|
| IPv6 ACL |
L3/L4
|
| RADIUS |
Authentication, Authrization, Accounting
|
| SSH 1.5/V2.0 | |
| Benutzernamen und Passwort |
Local Authentication
Remote Authentication via RADIUS/TACACS+, AAA |
| Management IP Filter |
SNMP
SSH |
| Control Plane Policing / CoPP | |
| Signed Firmware Image | |
| Storm Control | |
| Image Integrity Check | |
| Password Hardening | |
| Layer 3 Funktionen | |
|---|---|
| statische Route |
IPv4, IPv6
|
| OSPF | |
| ECMP |
Dynamic Load Balancing (DLB)
|
| BGP4 | |
| VRRP | |
| Managementfunktionalität | |
|---|---|
| SSH | |
| Dual Image | |
| SNMP v1/v2c/v3 | |
| DNS-Client | |
| EVENT / Error Log | |
| Remote PING | |
| Traceroute | |
| SNTPv4 | |
| LLDP |
802.1ab
802.MED Potential Error Detection |
| Port-Spiegelung |
SPAN, ERSPAN
|
| sFlow v5 |
Ingress
|
| Port Speed Setting | |
| Thermal Control | |
| Syslog over TLS | |
| BUS Monitor and Recovery | |
| Transceiver Type Auto Detection | |
| Pre-emphasis Setting | |
| Tech-support | |
| Reset Factory Default | |
| IPv6 Management | |
|---|---|
| DHCPv6 | |
| IPv6 RADIUS Unterstützung | |
| IPv6 TACACS+ Unterstützung | |
| IPv6 Syslog Unterstützung | |
| Umweltauflagen | |
|---|---|
| PFC Watchdog (DCBx supported) | |
| prioritätsbasierter Flow Control (802.1Qbb) |
802.1p
IP-DSCP |
| mechanisch | |
|---|---|
| Abmessungen (HxBxT) |
IEEE 802.1Q Tagged Base
Port-Based |
| Gewicht |
6.4kg/14.1lbs (NET)
|
| Airflow | |
|---|---|
| Airflow |
Front to Back, Back to Front
|
| Umweltvorgaben | |
|---|---|
| Betriebstemperatur |
0°C to 40°C (32°F to 104°F) @3000ft/900m
|
| Luftfeuchtigkeit bei Betrieb |
5% to 95% (RH), non-condensing
|
| elektrisch | |
|---|---|
| Strombedarf |
120W*2 without BMC, 150W*2 with BMC (1+1)
|
| Sicherheit | |
|---|---|
| Sicherheit |
UL, cUL, CB
|
| EMC | |
|---|---|
| EMC |
CE, FCC, VCCI, BSMI, ICES, C-Tick
|
| RoHS | |
|---|---|
| RoHS |
Reduction of Hazardous Substances (RoHS) 6
|
| Unterstützt Optics und Cables | |
|---|---|
| Unterstützte Optics und Cables |
‧ 1000BASE-T: Cat 5e
‧ DAC cable (SFP+): 0.5m,1m, 1.5m, 2m, 2.5m,3m, and 5m ‧ AOC cable (SFP+, 850nm, MMF): 1m, 3m, 7m, 10m, 20m, and 100m ‧ 10G optic (SFP+, LC, 850nm, MMF): 10GBASE-SR optic ‧ 10G optic (SFP+, LC, 1310nm, SMF): 10GBASE-LR optic |
Wir können Ihre Anfrage nicht abschließen !
Bitte besuchen Sie uns für weitere Informationen, oder lassen Sie uns wissen, wie wir Ihnen jetzt helfen können.