QuantaMesh T7032-IX7D with SONiC

The Next Wave 100G Ethernet Switch for Data Center and Cloud Computing

  • 32 x 40/100GbE QSFP28
  • VXLAN
  • Multi-Chassis Link Aggregation (MLAG)
  • OSPF, BGP4 with ECMP
  • Network Automation
  • Enterprise SONiC by QCT

QuantaMesh Ethernet Switches with QCT Enterprise SONiC provide comprehensive Layer 2 and Layer 3 features

SONiC Distribution by QCT (QCT Enterprise SONiC) is the modern software platform for data centers and cloud networks which is based on Microsoft SONiC platform for tradition L2/L3 features as well as software-defined network (SDN) applications. Inherited from SONiC, QCT Enterprise SONiC is a proven protocol stack solution that can run on several control plane processors including PowerPC, x86, and ARM with robust operating performance and flexible deployment.  For the fundamentals of modern data center networks such as network automation, virtualization, high availability and data center oriented, QCT Enterprise SONiC provides a comprehensive feature set to cover all types of applications. 

 

  • VXLAN

  • Multi-Chassis Link Aggregation (MLAG)

  • OSPF

  • Network Automation

  • BGP

 

 

 

100G Ethernet Switch for Data Center and Cloud

Data center networks face the changes with hardware and meet the requirements of the software it hosts. Quanta Cloud Technology provides a series of Ethernet Switches, the QCT QuantaMesh switch product line, that addresses these changes and provides the advanced features that meet the demands for the contemporary data center applications. The QCT QuantaMesh product lines provide the connections from 1G to 100Gbps speeds on its Ethernet Switches. To meet the requirements of high performance, high availability, fast scale out, low latency performance, and continuous serviceability for data center applications. The QCT QuantaMesh Ethernet Switch product line supported with Enterprise SONiC Distribution by QCT to provide the advanced features, which is the best choice for Data Center application.

 

QuantaMesh T7032-IX7D is a high-performance and low latency layer 3 managed switches deployed as the Data Center Leaf Switch to connect to 100G servers or deployed as Data Center Spine Switch to aggregate 100G connections from Leaf Switches to expend the network scalability. T7032-IX7D supports 32 QSFP28, each supporting 1 x 100GbE or 1 x 40GbE, or via breakout cables, 2 x 50GbE, 4 x 25GbE, or 4 x 10GbE. It supports 3.2 Terabits per second (Tbps) of bandwidth in a 1-Rack-Unit (1RU) switch. By levering merchant silicon chip, T7032-IX7D is a high performance and high density Ethernet switch with advanced features such as smart table, dynamic load balancing, and VxLAN/RIOT support. T7032-IX7D also support larger tables size, improves the performance for larger packet buffers and reduced the latency. With QCT Enterprise SONiC supported, T7032-IX7D is the best fit for Data Center application.

physische Ports
Port-Konfiguration
32 40/100GbE QSFP28 ports
Management Port
Out-of-band management port (RJ-45, 10/100/1000Base-T)
Console Port
1 (RJ-45)
USB
USB 2.0
Leistung
Schaltleistung
6.4Tbps
maximalen Paketdurchsatzes
3.3Bpps
Latenz
Ultra-low latency
CPU Board 1
MAC
Broadcom TD3 56870
CPU
Intel Atom Denverton, TPM 2.0
Arbeitsspeicher
8GB DDR3/ECC
Massenspeicher
128GB M.2 SATA for storage
Layer 2 Funktionen
Schaltmodus
Store-and-Forward
Spanning-Tree
VLAN
IEEE 802.1Q Tagged Base
Port-Based
QinQ (802.1ad)
Storm Control
Broadcast
Unknown Multicast
DLF (Unknown Unicast)
IGMP Snooping
v1/v2/v3
v1/v2 Querier
Immediate Leave
Link Aggregation
Dynamic Load Balancing (DLB)
802.3ad with LACP
Static Trunk
Unicast/Multicast Traffic Balance over Trunking Port
LACP Fallback
MTU Setting
Static LAG
QoS-Funktionen
COS
802.1p, IP TOS Precedence, DSCP
DiffServ
DSCP to Traffic Class Mapping
Sicherheits-Funktionen
Zugriffskontrollliste
L2/L3/L4
IPv6 ACL
L3/L4
RADIUS
Authentication, Authrization, Accounting
SSH 1.5/V2.0
Benutzernamen und Passwort
Local Authentication
Remote Authentication via RADIUS/TACACS+, AAA
Management IP Filter
SNMP
SSH
Control Plane Policing / CoPP
Signed Firmware Image
Storm Control
Image Integrity Check
Password Hardening
Layer 3 Funktionen
statische Route
IPv4, IPv6
OSPF
ECMP
Dynamic Load Balancing (DLB)
BGP4
VRRP
Managementfunktionalität
PTP TC 1-Step E2E (1588 1-Step End-to-End Transparent Clock)
SSH
Dual Image
SNMP v1/v2c/v3
DNS-Client
EVENT / Error Log
Remote PING
Traceroute
SNTPv4
LLDP
802.1ab
802.MED
Potential Error Detection
Port-Spiegelung
SPAN, ERSPAN
sFlow v5
Ingress
Port Speed Setting
Thermal Control
Syslog over TLS
IPv4/ IPv6
BUS Monitor and Recovery
Transceiver Type Auto Detection
Pre-emphasis Setting
Tech-support
Reset Factory Default
IPv6 Management
DHCPv6
IPv6 RADIUS Unterstützung
IPv6 TACACS+ Unterstützung
IPv6 Syslog Unterstützung
Hohe Verfügbarkeit
Multi-chassis LAG
IGMPv1/v2/v3 SNP
Standalone Mode
L2 Unicast
Umweltauflagen
PFC Watchdog (DCBx supported)
prioritätsbasierter Flow Control (802.1Qbb)
802.1p
IP-DSCP
Automation
Zero Touch Provision (ZTP)
Virtualisierungsfunktionen
VxLAN Switching
mechanisch
Abmessungen (HxBxT)
43.2x440x508mm
Gewicht
9.33kg/20.55lbs (NET)
Airflow
Airflow
Front to Back, Back to Front
Umweltvorgaben
Betriebstemperatur
0~45°C
Luftfeuchtigkeit bei Betrieb
90% maximum relative humidity
elektrisch
Strombedarf
100~240VAC, 50/60Hz, 750W*2 (1+1)
Stromverbrauch
Idle Mode: 217W
Normal Mode: 293W
Sicherheit
Sicherheit
UL, cUL, CB
EMC
EMC
CE, FCC, VCCI, CCC
RoHS
RoHS
Reduction of Hazardous Substances (RoHS) 6
Unterstützt Optics und Cables
Unterstützte Optics und Cables
DAC cable (QSFP+): 1m, 3m, and 5m
DAC cable (QSFP+, fan-out): 1m, 3m, and 5m
DAC cable (QSFP28): 1m, 3m, and 5m
DAC cable (QSFP28, fan-out): 3m
AOC cable (QSFP+, 850nm, MMF): 7m and 10m
AOC cable (QSFP28, 850m, MMF): 1m, 3m, 5m, and 10m
40G optic (QSFP+, MPO, 850nm, MMF): 40GBASE-SR4
40G optic (QSFP+, LC, 1310nm, SMF): 40GBASE-LR4
100G optic (QSFP28, MPO, 850nm, MMF): 100GBASE-SR4
100G optic (QSFP28, MPO, 1310nm, SMF): 100GBASE-PSM4
100G optic (QSFP28, LC, 1310nm, SMF): 100GBASE-LR4
Bestellinformation
Bestellinformation
T7032-IX7D (1IX7U7Z000E) Front to Back, with Rail Kit
T7032-IX7D (1IX7U7Z000F) Back to Front, with Rail Kit

Wir können Ihre Anfrage nicht abschließen !

Bitte besuchen Sie uns für weitere Informationen, oder lassen Sie uns wissen, wie wir Ihnen jetzt helfen können.

Wir können Ihre Anfrage nicht abschließen !

Bitte besuchen Sie uns für weitere Informationen, oder lassen Sie uns wissen, wie wir Ihnen jetzt helfen können.