QuantaMesh T7032-IX7D
The Next Wave 100G Ethernet Switch for Data Center and Cloud Computing
- 32 x 40/100GbE QSFP28
- VXLAN
- Multi-Chassis Link Aggregation (MLAG)
- OSPF, BGP4 with ECMP
- Network Automation
- 
ArcOS®
The Next Wave 100G Ethernet Switch for Data Center and CloudData center networks face the changes with hardware and meet the requirements of the software it hosts. Quanta Cloud Technology provides a series of Ethernet Switches, the QCT QuantaMesh switch product line, that addresses these changes and provides the advanced features that meet the demands for the contemporary data center applications. The QCT QuantaMesh product lines provide the connections from 1G to 100Gbps speeds on its Ethernet Switches. To meet the requirements of high performance, high availability, fast scale out, low latency performance, and continuous serviceability for data center applications. The QCT QuantaMesh Ethernet Switch product line supported with QNOS (Quanta Network OS) to provide the advanced features, which is the best choice for Data Center application.
QCT T7032-IX7D is a high-performance and low latency layer 3 managed switches deployed as the Data Center Leaf Switch to connect to 100G servers or deployed as Data Center Spine Switch to aggregate 100G connections from Leaf Switches to expend the network scalability. T7032-IX7D supports 32 QSFP28, each supporting 1 x 100GbE or 1 x 40GbE, or via breakout cables, 2 x 50GbE, 4 x 25GbE, or 4 x 10GbE. It equipped with BMC in a 1-Rack-Unit (1RU) switch and supports 3.2 Terabits per second (Tbps) of bandwidth. By levering merchant silicon chip, T7032-IX7D is a high performance and high density Ethernet switch with advanced features such as smart table, dynamic load balancing, and VxLAN/RIOT support. T7032-IX7D also support larger tables size, improves the performance for larger packet buffers and reduced the latency. With QNOS (Quanta Network OS) supported, T7032-IX7D is the best fit for Data Center application.
|
Certification
 (Safety)_16112318621.jpg "cUL (Canada) (Safety)"){kind=icon}
 (Safety)_16122914570.gif "UL listed (US & Canada) (Safety)"){kind=icon}
_16112317282.png "RCM(AustraliaNew Zealand)"){kind=icon}
| Physical ports | |
|---|---|
| Port configuration |
32 40/100GbE QSFP28 ports
|
| Management Port |
Out-of-band management port (RJ-45, 10/100/1000Base-T)
|
| Console Port |
1 (RJ-45)
|
| USB |
USB 2.0
|
| Performance | |
|---|---|
| Switching capacity |
6.4Tbps
|
| Maximum forwarding rate |
3.3Bpps
|
| Latency |
Ultra-low latency
|
| Major Components | |
|---|---|
| ASIC |
Broadcom TD3 56870
|
| CPU |
Intel Atom Denverton, TPM 2.0
|
| Memory |
8GB DDR4 with ECC
|
| Storage |
128GB M.2 SATA for storage
|
| Layer 2 Features | |
|---|---|
| Switching Mode |
Store-and-Forward
|
| Spanning Tree |
802.1w
802.1s
Auto Edge
|
| VLAN |
IEEE 802.1Q Tagged Base
Port-based QinQ (802.1ad) |
| Storm Control |
Broadcast
Unknown Multicast
DLF (Unknown Unicast)
|
| IGMP Snooping |
v1/v2/v3
v1/v2 Querier
Immediate Leave
|
| MLD Snooping v1/v2 | |
| Link Aggregation |
Dynamic Load Balancing (DLB)
802.3ad with LACP
Static Trunk
Unicast/Multicast Traffic Balance over Trunking Port
LACP Fallback
|
| Link State Tracking | |
| Port Backup | |
| Loopback Detection | |
| Private VLAN | |
| Link Debounce | |
| QoS Features | |
|---|---|
| Scheduling for priority queue |
WRR
Strict Hybrid |
| COS |
802.1p
IP TOS precedence
DSCP
|
| DiffServ | |
| iSCSI optimization | |
| Security Features | |
|---|---|
| Static and dynamic port security (MAC-based) | |
| 802.1x (MD5, MS-CHAPv2) |
Port-based
MAC-based
Auto VLAN assignment
Guest VLAN
Unauthenticated VLAN
|
| Access Control List |
L2/L3/L4
|
| IPv4/IPv6 ACL |
L3/L4
|
| RADIUS/TACACS+ |
Authentication, Authorization, Accounting
|
| SSH V2.0 | |
| User name and password |
Local Authentication
|
| Management IP filtering |
SNMP
Telnet SSH |
| IP Source Guard | |
| Dynamic ARP inspection (DAI) | |
| DHCP snooping |
IPv4
IPv6 |
| SSH Public Key Authentication | |
| Signed firmware image | |
| Control Plane Policing / CoPP | |
| Service Prohibit Access | |
| Role Base Access Control (RBAC) | |
| Layer 3 Features | |
|---|---|
| IPv4 unnumbered interfaces | |
| IP Multinetting/CIDR |
IP Multinetting/CIDR
|
| /31 subnets | |
| Proxy ARP | |
| Static route |
IPv4
IPv6 |
| OSPF v2/v3 | |
| ECMP |
Dynamic Load Balancing (DLB)
|
| BGP4 | |
| IGMP v1/v2/v3 | |
| PIM-SM/-SM6 | |
| SSM | |
| MLD v1/v2 | |
| VRRP v2 | |
| Policy-Based Routing (PBR) | |
| BFD | |
| VRF Lite | |
| Black Hole Detection (BHD) | |
| VRRP v2/ v3 | |
| IP SLA | |
| Management Features | |
|---|---|
| IP helper | |
| IPv4 Device Tracking | |
| PTP Transparent Clock 1-step E2E (1588 1-Step end-to-end transparent clock) | |
| Industrial standard command-line interface | |
| CLI filtering | |
| CLI schedule | |
| SSH | |
| Software Update |
TFTP
SCP SFTP |
| Configuration download/upload |
TFTP
SCP SFTP |
| Dual Images | |
| SNMP v1/v2c/v3 | |
| SNMP inform v2 | |
| RMON1 Groups: 1, 2, 3, 9 | |
| DHCP client | |
| DHCP relay (VxLAN environment supported) | |
| Remote PING | |
| Traceroute | |
| NTPv4 | |
| LLDP |
802.1ab
802.MED
Potential error detection
|
| UDLD | |
| Port mirroring |
SPAN
RSPAN |
| EVENT / Error log | |
| sFlow v5 | |
| Email alerting |
SMTP
|
| Error-Disable Recovery | |
| IPv6 Management | |
|---|---|
| IPv4/IPv6 Dual Protocol Stack | |
| ICMPv6 | |
| ICMPv6 Redirect | |
| IPv6 Neighbor Discovery | |
| Stateless Autoconfiguration | |
| Manual Configuration | |
| DHCPv6 client/relay | |
| SNMP over IPv6 | |
| SSH over IPv6 | |
| IPv6 DNS Resolver | |
| IPv6 RADIUS | |
| IPv6 TACACS+ | |
| IPv6 Syslog | |
| IPv6 TFTP | |
| High Availability | |
|---|---|
| Multi-Chassis Link Aggregation (MLAG) |
- IGMPv1/v2/v3 SNP and MLDv1/v2 SNP
- Standalone mode - L2/L3 unicast - RSTP/MSTP - VXLAN |
| In-Service Software Upgrade (ISSU) | |
| Data Center Features | |
|---|---|
| Anycast gateways | |
| Priority-based Flow Control (802.1Qbb) |
802.1p
IP-DSCP
|
| DCBX |
DCBX for ETS
DCBX for PFC PCBX for Application Priority |
| FCoE Initiation Protocol (FIP) snooping | |
| RoCEv1/v2 | |
| PFC watchdog (DCBx supported) | |
| Automation | |
|---|---|
| Auto installation | |
| Zero Touch Provision (ZTP) | |
| RESTful API | |
| Ansible | |
| NETCONF/RESTCONF | |
| Virtualization Features | |
|---|---|
| VxLAN Switching/Routing | |
| BGP-EVPN Route Support |
Ethernet autodiscovery Route (Type-1)
MAC with IP advertisement Route (Type-2)
Inclusive multicast Ethernet tag Toute (Type-3)
Ethernet segment Route (Type-4)
IP prefix Route (Type-5)
|
| Multihoming Designated Forwarder election enhancement (RFC8584) | |
| SDN | |
|---|---|
| OpenFlow v1.3 | |
| Mechanical | |
|---|---|
| Dimension (HxWxD) |
44 x 440 x 508mm
|
| Weight |
9.33kg/20.55lbs (NET)
|
| Environmental Specifications | |
|---|---|
| Operating temperature |
0~45°C
|
| Operating humidity |
90% maximum relative humidity
|
| Power | |
|---|---|
| PSU |
100~240VAC, 50/60Hz, 750W*2 (1+1)
|
| Power consumption |
Idle Mode: 217W
Normal Mode: 293W |
| Safety | |
|---|---|
| Safety |
UL, cUL, CB
|
| EMC | |
|---|---|
| EMC |
CE, FCC, VCCI, CCC
|
| RoHS | |
|---|---|
| RoHS |
Reduction of Hazardous Substances (RoHS) 6
|
| Supported Optics and Cables | |
|---|---|
| Supported Optics and Cables |
DAC cable (QSFP+): 1m, 3m, and 5m
DAC cable (QSFP+, fan-out): 1m, 3m, and 5m DAC cable (QSFP28): 1m, 3m, and 5m DAC cable (QSFP28, fan-out): 3m AOC cable (QSFP+, 850nm, MMF): 7m and 10m AOC cable (QSFP28, 850m, MMF): 1m, 3m, 5m, and 10m 40G optic (QSFP+, MPO, 850nm, MMF): 40GBASE-SR4 40G optic (QSFP+, LC, 1310nm, SMF): 40GBASE-LR4 100G optic (QSFP28, MPO, 850nm, MMF): 100GBASE-SR4 100G optic (QSFP28, MPO, 1310nm, SMF): 100GBASE-PSM4 100G optic (QSFP28, LC, 1310nm, SMF): 100GBASE-LR4 |
| Ordering Information | |
|---|---|
| Ordering Information |
T7032-IX7D (1IX7U7Z0002) Front to Back, with Rail Kit
T7032-IX7D (1IX7U7Z0003) Back to Front, with Rail Kit |
Installation / Setup Tips (3)
- 1. [Switch] Can I replace the power supply unit (PSU) and fan to a different direction airflow by myself?
- 2. [Switch] The redundant power supply unit (PSU) in QuantaMesh Switch.
- 3. [Switch] What can I do if I forget the username/password of my QuantaMesh Ethernet Switch?
- 1. [Switch] Are QuantaMesh Network OS (QNOS) license node locked?
- 2. [Switch] What is SDN-ready QuantaMesh Ethernet Switch?
- 3. [Switch] What is included in the QuantaMesh Network Operating System (QNOS)?
- 4. [Switch] What is the End-of-Life policy of a QuantaMesh Switch?
- 5. [Switch] What is the QuantaMesh Ethernet Switch?
- 6. [Switch] Which items are included in the package of a QuantaMesh Switch?
SHI International Corp. - Reseller / System Integrator
290 Davidson Avenue, Somerset, NJ, 08873 USA
Phone 732-868-8724
Toll-Free 888-764-8888
SYNNEX - Distributor
44201 Nobel Drive Fremont, CA 94538
Phone (800) 756-9888
Toll-Free 888-756-4888