QuantaMesh T7032-IX7D with SONiC

The Next Wave 100G Ethernet Switch for Data Center and Cloud Computing

  • 32 x 40/100GbE QSFP28
  • VXLAN
  • Multi-Chassis Link Aggregation (MLAG)
  • OSPF, BGP4 with ECMP
  • Network Automation
  • Enterprise SONiC by QCT

QuantaMesh Ethernet Switches with QCT Enterprise SONiC provide comprehensive Layer 2 and Layer 3 features

SONiC Distribution by QCT (QCT Enterprise SONiC) is the modern software platform for data centers and cloud networks which is based on Microsoft SONiC platform for tradition L2/L3 features as well as software-defined network (SDN) applications. Inherited from SONiC, QCT Enterprise SONiC is a proven protocol stack solution that can run on several control plane processors including PowerPC, x86, and ARM with robust operating performance and flexible deployment.  For the fundamentals of modern data center networks such as network automation, virtualization, high availability and data center oriented, QCT Enterprise SONiC provides a comprehensive feature set to cover all types of applications. 

 

 

  • VXLAN

  • Multi-Chassis Link Aggregation (MLAG)

  • OSPF

  • Network Automation

  • BGP

 

 

100G Ethernet Switch for Data Center and Cloud

Data center networks face the changes with hardware and meet the requirements of the software it hosts. Quanta Cloud Technology provides a series of Ethernet Switches, the QCT QuantaMesh switch product line, that addresses these changes and provides the advanced features that meet the demands for the contemporary data center applications. The QCT QuantaMesh product lines provide the connections from 1G to 100Gbps speeds on its Ethernet Switches. To meet the requirements of high performance, high availability, fast scale out, low latency performance, and continuous serviceability for data center applications. The QCT QuantaMesh Ethernet Switch product line supported with Enterprise SONiC Distribution by QCT to provide the advanced features, which is the best choice for Data Center application.

 

QuantaMesh T7032-IX7D is a high-performance and low latency layer 3 managed switches deployed as the Data Center Leaf Switch to connect to 100G servers or deployed as Data Center Spine Switch to aggregate 100G connections from Leaf Switches to expend the network scalability. T7032-IX7D supports 32 QSFP28, each supporting 1 x 100GbE or 1 x 40GbE, or via breakout cables, 2 x 50GbE, 4 x 25GbE, or 4 x 10GbE. It supports 3.2 Terabits per second (Tbps) of bandwidth in a 1-Rack-Unit (1RU) switch. By levering merchant silicon chip, T7032-IX7D is a high performance and high density Ethernet switch with advanced features such as smart table, dynamic load balancing, and VxLAN/RIOT support. T7032-IX7D also support larger tables size, improves the performance for larger packet buffers and reduced the latency. With QCT Enterprise SONiC supported, T7032-IX7D is the best fit for Data Center application.

Physical ports
Port configuration
32 40/100GbE QSFP28 ports
Management Port
Out-of-band management port (RJ-45, 10/100/1000Base-T)
Console Port
1 (RJ-45)
USB
USB 2.0
Performance
Switching capacity
6.4Tbps
Maximum forwarding rate
3.3Bpps
Latency
Ultra-low latency
Major Components
ASIC
Broadcom TD3 56870
CPU
Intel Atom Denverton, TPM 2.0
Memory
8GB DDR3/ECC
Storage
128GB M.2 SATA for storage
Layer 2 Features
VLAN
Spanning Tree
STP
LLDP
Link Aggregation
Dynamic Support
MTU Setting
MLAG (MAC/MFDB/STP)
VxLAN with EVPN (Type-3)
IGMP Snooping
IGMP-PLUS
Policy/Protcol
ARP Sync on MLAG
Auto-LAG (LLDP Part)
Static LAG
Quality of Service
COS
802.1p, IP TOS Precedence, DSCP
DSCP to Traffic Class Mapping
DiffServ
Priority Flow Control (PFC) and PFC Watchdog
Security Features
Storm Control
Access Control List
L2/L3/L4
RADIUS/TACACS+
AAA
Image Integrity Check
Password Hardening
Dos Attack Protection
802.x
Phase1 User Account Authentication
DHCP Snooping
IPv4
Layer 3 Features
Static Route
IPv4/IPV6
BGP-support IPv4 Only
VRRPv2
Support AA Mode
OSPFv2
VRF with L3 Protocols
Static Route/OSPF/BGP
VRF Leaking
PIM-SM
FRR Upgrade
Management and Monitoring
SSH
SNMP v1/v2/v3
Port Speed Setting
Thermal Control
Syslog over TLS
IPv4/ IPv6
NTP
sFlow
EVENT/Error Log
ZTP
DHCP Relay
BUS Monitor and Recovery
Transceiver Type Auto Detection
PTP 1-step E2E
Pre-emphasis Setting
Tech-support
Dual Image
Reset Factory Default
RESTCONF API
Mechanical
Dimension (HxWxD)
43.2x440x508mm
Weight
9.33kg/20.55lbs (NET)
Airflow
Airflow
Front to Back, Back to Front
Environmental Specifications
Operating temperature
0~45°C
Operating humidity
90% maximum relative humidity
Power
PSU
100~240VAC, 50/60Hz, 750W*2 (1+1)
Power consumption
Idle Mode: 217W
Normal Mode: 293W
Safety
Safety
UL, cUL, CB
EMC
EMC
CE, FCC, VCCI, CCC
RoHS
RoHS
Reduction of Hazardous Substances (RoHS) 6
Supported Optics and Cables
Supported Optics and Cables
DAC cable (QSFP+): 1m, 3m, and 5m
DAC cable (QSFP+, fan-out): 1m, 3m, and 5m
DAC cable (QSFP28): 1m, 3m, and 5m
DAC cable (QSFP28, fan-out): 3m
AOC cable (QSFP+, 850nm, MMF): 7m and 10m
AOC cable (QSFP28, 850m, MMF): 1m, 3m, 5m, and 10m
40G optic (QSFP+, MPO, 850nm, MMF): 40GBASE-SR4
40G optic (QSFP+, LC, 1310nm, SMF): 40GBASE-LR4
100G optic (QSFP28, MPO, 850nm, MMF): 100GBASE-SR4
100G optic (QSFP28, MPO, 1310nm, SMF): 100GBASE-PSM4
100G optic (QSFP28, LC, 1310nm, SMF): 100GBASE-LR4
Ordering Information
Ordering Information
T7032-IX7D (1IX7U7Z000E) Front to Back, with Rail Kit
T7032-IX7D (1IX7U7Z000F) Back to Front, with Rail Kit

Content to be Updated !

Please visit FAQ page for more topics, or leave us a message, Contact us now.

Content to be Updated !

Please visit Where to buy page for more information, or let us know how we can help, Contact us now.