Installation / Setup Tips

[Switch] How to break out a 40G port into 4x10G Ports in the QuantaMesh Ethernet T5032-LY6?

The command "port-mode { 1x40g | 4x10g }" in the interface config mode can break out a 40G port into 4x10G ports. It will not take effect until the next boot cycle. In the QuantaMesh T5032-LY6, there are two channels in the ASIC chip and each channel covers 16 QSFP+ ports. One channel can be split into 48 logical 10G ports, which means 12 QSFP+ ports is the maximum number you can configure per channel. So the maximum number of ports in the QuantaMesh Ethernet T5032-LY6 is 96x10G and 8x40G ports.

Product Model
QuantaMesh T3048-LY8 QuantaMesh T3048-LY9 QuantaMesh T3048-LY2R QuantaMesh T3024-P05 QuantaMesh T5032-LY6 QuantaMesh BMS T7064-IX4 QuantaMesh BMS T7032-IX7 QuantaMesh BMS T4048-IX8 QuantaMesh BMS T4048-IX3